1:6 Scale Ordnance and Weapons Decals



ABOVE: Real Heroes doing a VERY dangerous job. Go NAVY!

Customize your Fairlandtoys YF-22 Raptor today!

DESCRIPTION (Please read):
The items shown on this page are custom designed and created for use with the YF-22 Raptor fighter jet toy made by Fairlandtoys (and originally sold by JCPenneys). The decal sets shown on this page are made of very high-quality waterslide stock, ready to install in just minutes. For waterslide decals, simply trim them out, soak in water and slide them off. There are no special adhesives required. Complete installation instructions are included with all decal sets.

PLEASE NOTE:
Our decal sets are for display and light play purposes only. Recommended for use by adults or with adult supervision. Do not submerge your toy in water after these decals have been applied. Aircraft and figures shown in photos are NOT included but can regularly be found on ebay and elsewhere online.


A NOTE ABOUT OUR ORDNANCE DECALS:
These decals are all crisp and sharp with tiny details and even little serial numbers. Detailing your ordnance with decals can take a while, but the results are stunning and a lot of fun to look at when you're through. Take your time and have FUN!

Please select from the following items:

 
1:6 Scale AMRAAM
(14-piece) Missile Decal Set

(ProSeries Waterslide)

You receive all the full color decals shown above. This is enough to fully detail ONE (1) AMRAAM Missile on your YF22 Raptor Jet. You must paint the missile body gray and the nose cone white before applying these (14) little decals as shown in the photos to the right. (red, yellow, blue, black, white)

Item #ORD1, $9.95
(Shipping is FREE to addresses within the US!)

 
1:6 Scale AMRAAM
(4-Pack) Missile Decal Set

(ProSeries Waterslide)

You receive FOUR of the full color (14-piece) decal sets shown above. That's enough to fully detail all FOUR (4) AMRAAM missiles on your YF22 Raptor Jet. You should paint the missiles gray and the nose cones white before applying these decals (see photos at right). (red, yellow, blue, black, white)

Item #ORD2, $32.95
(Shipping is FREE to addresses within the US!)
You SAVE $6.85!

 
1:6 scale JDAM Bomb Decal (1)
(ProSeries Waterslide)

This is the tiny decal (approx. 1/2" wide) you'll need to detail ONE (1) JDAM Bomb from your YF22. A mass-produced "dumb bomb," the JDAM is the workhorse munition of the Navy, Marines and Air Force, and it's paint job is kept very simple. The bomb's body is a basic OD green (sometimes gray for Navy) and the rear third section is usually solid red (see photo above). After you've painted it, apply this (white-lettered) waterslide decal near the tail fins (as shown in the photo). COOL!

Item #ORD3, $3.95
(Shipping is FREE to addresses within the US!)

 
1:6 Scale Sidewinder (10-piece)
Air-to-Air Missile Decal Set

(ProSeries Waterslide)

This is the decal set you need to detail ONE (1) Sidewinder or Paveway missile from your YF22. You must first paint the missile body gloss white and the tip semi-flat black before applying these (10) little waterslide decals (as shown in the photo above) . Combine this set with item #YF2225 for the ultimate detail. (red, yellow, black)

Item #ORD4, $8.95
(Shipping is FREE to addresses within the US!)

 
1:6 Scale Missile Logo Decal
(ProSeries Waterslide)

This is the tiny logo decal (approx. 1/2" wide) you need to finish detailing ONE (1) air-to-air missile from your YF22. You must first paint the missile body gloss white and the tip semi-flat black before applying these waterslide decals (as shown in the photo above) . Combine this decal with set #YF2224 for the ultimate detail. (red on white field)

Item #ORD5, $3.95
(Shipping is FREE to addresses within the US!)


Don't miss these related items: 
1:6 Scale
German Land Mine Decals

(ProSeries Waterslide)

These are the authentic German markings you'll need to accurately detail ONE (1) of the 1:6 scale WW2 German Tellermines. Read all about them on THIS PAGE.

PLACE ORDER HERE:

Name of Product:


Quantity:


YF22 ACCESSORIES--------DECALS--------HOME









Looking for something specific, but don't know where to start?


PLEASE NOTE: All credit card information and transactions are 100% secure. We currently accept the following forms of payment: PayPal, Mastercard, VISA, Discover, Money Orders, Personal Checks (allow 10 days clearance for checks). See your shopping cart during checkout for additional details.

Patches of Pride products are manufactured in 1/6th scale for use with 12 inch action figure toys like GIjOEs--not for use on full-size real uniforms worn by human beings. These products are accurate (miniature) recreations of historical artifacts, some related to the Axis powers of WWII. Patches of Pride / Toylectibles / Sterling Creative Group however, and the individuals connected with the manufacture of these products do not endorse nor subscribe to the philosophies or beliefs of Nazism. Quite the contrary. Our miniature products are intended for the use of FREEDOM-LOVING toy and action figure collectors, military hobbyists, militaria enthusiasts and historians around the world in the completion of their dioramas, or other such miniature 1/6th scale historical displays---and not for any other purpose. We do NOT sell nazi-related merchandise to customers with addresses in Germany. The use of photos in this website showing vintage GIJoes or Barbies or other such toys, or the GIjOE, Hasbro, Mattel (or other) logos is not meant to indicate an endorsement by any of those companies.

©Mark Otnes, DBA Patches of Pride / Toylectibles / Sterling Creative Group
All rights reserved. 303 E. Sherwin Drive, Urbana, IL 61802
Phone:
217-337-1706, Email: mark@patchesofpride.com







Fast Payday
Powered by: Fast payday loans