AT Sea Sled Decals and Accessories


DESCRIPTION (Please read):
The decals and accessories shown on this page were created for use with the 1970s vintage AT Sea Sled. The decals are printed on professional grade, high-gloss, peel-n-stick stock, ready to install in just minutes. Simply trim the decals out, peel them off and stick into position. Complete installation instructions are included with all sets.

The accessories are made of high-impact, extremely durable plastic, custom sized and machined to fit the sonar dome hole and the gauge bezel holes. After sticking down the decals, simply place a tiny bit of glue on the sides of the bezel holes and insert the domes. That's it!

PLEASE NOTE:
These decal sets are recommended for display and light play purposes only. Recommended for use by adults or with adult supervision. Do NOT submerge your toy under water after these decals have been applied. Vehicles, figures and equipment shown in photos are not included but can regularly be found on ebay and elsewhere online.

Please choose from the following:

  
AT Emblem Decal

Each of these (brand new) peel-n-stick decals (1.5" w) are printed onto top-quality, glossy peel-n-stick stock. An economical replacement solution to any missing or worn decals. Simply trim out, peel off the backing paper and stick down. No additional adhesives required. All are in traditional red/black colors.

SEE CLOSEUP

Choose from these 2 versions:

Economy Version

1-1/2" Diameter (Red/Black)-
Item #ATSLED1, $3.95

SuperClear Protected Version
1-1/2" Diameter (Red/Black)-
Item #ATSLED2, $4.50
(Shipping is FREE to addresses within the U.S.)

Name of Product:


Quantity:

 
Sea Sled Sonar Display
w/Gauges Decal Set
(full color, peel-n-stick)

Each of these (brand new) decal sets are printed onto top-quality, glossy peel-n-stick stock. Superior replacement solution to missing or worn decals. Simply trim out, peel off the backing paper and stick down. No additional adhesives required. Protect with a new sonar dome and gauges dome set (sold separately). (green/black/red)
Complete installation instructions included.

SEE CLOSEUP

Glossy, peel-n-stick-
Item #ATSLED3, $9.95
(Shipping is FREE to addresses within the U.S.)

Quantity:

 
AT Sea Sled Stripes Decal Set

This is a BIG set. Each of these (brand new) peel-n-stick decal sets are printed onto top-quality, glossy peel-n-stick stock. Superior replacement solution to missing or worn decals. Simply trim out, peel off the backing paper and stick down. No additional adhesives required. (white stripes)

SEE CLOSEUP

AT Sea Sled Stripes Decal Set
Glossy, peel-n-stick-
Item #ATSLED5, $19.95 (plus s/h)

Quantity:

 
Sea Sled Sonar Dome
w/Real Magnifying Action!

Absolutely beautiful replacement sonar dome for use on your AT Sea Sled. Replaces missing, cracked or scuffed originals. All domes are precision machined to the exact size and hemispheric shape of the ones used on vintage Sea Sleds and are constructed of solid, clear acrylic to create a REAL magnifying effect when placed over our new sonar display decal (sold separately, see above). Installs with a 2 drops of superglue--in only seconds!

SEE CLOSEUP

Sea Sled Sonar Dome
Solid acrylic-
Item #ATSLED6, $9.95 (plus s/h)

Quantity:


Sea Sled Gauge Dome Set (2)
w/Real Magnifying Action!

Absolutely beautiful gauge domes for use on your vintage Sea Sled. Each is precision-made to the exact size and hemispheric shape required to fit vintage and AT Sea Sleds and are constructed of flexible, clear acrylic, creating a REAL magnifying effect when placed over our new gauge decals (sold separately). Installs with a 2 drops of gel-based superglue--in only seconds!

SEE CLOSEUP

AT Sea Sled Gauge Dome Set (2)
Solid acrylic-
Item #ATSLED7, $4.95
(Shipping is FREE to addresses within the U.S.)

Quantity:

 
AT Sea Sled "Ultra-Flex"
Replacement Windshield
(clear, unbreakable, flexible acrylic)

It's not widely known, but the vintage Sea Sled and the AT Sea Sled windshields were of different sizes and shapes. The AT version is about half the height and is known as the "Low Rise" windshield, while the vintage one was taller and is known as the "Hi-Boy." Each of our reproductions is custom-made to the original's exact size and shape and is constructed of flexible, clear acrylic.It's also slightly thinner than the original, more durable and UNBREAKABLE. Installs with a 3 drops of gel-based superglue placed on the mounting pegs, then inserted into the holes on the sled.

SEE CLOSEUP

AT Sea Sled "Low Rise" Windshield
Clear, flexible acrylic-
Item #ATSLED8, $18.95
(Shipping is FREE to addresses within the U.S.)

Quantity:


Sea Sled Diver's Restraint Arch
(ready-to-paint plastic)

SEE CLOSEUP

This is a durable, pliable replacement diver's arch for use on your AT Sea Sled. Manufactured to specific standards, they're near duplicates of the originals which were (and are) required to keep a figure securely on the sled. Simply glue them into place for an easy installation. For use with BOTH the orange Sea Sled and the blue AT Sea Sled. We have left these unpainted, as we've found it much preferable to wait and paint them AFTER they've been installed, allowing extra paint to also overlap onto the deck, ensuring a seamless color match. Complete installation instructions included.We recommend LOCTITE superglue for plastics.

Sea Sled Diver's Arch Restraint
Item #ATSLED9, $18.95
(Shipping is FREE to addresses within the U.S.)

Quantity:


 
Looking for parts for your vintage Sea Sled?

GO TO THAT PAGE NOW

TO ORDER an item shown on this page:

1) Enter the quantity you desire here:

DECALS--------HOME




Looking for something specific, but don't know where to start?


PLEASE NOTE: All credit card information and transactions are 100% secure. We currently accept the following forms of payment: PayPal, Mastercard, VISA, Discover, Money Orders, Personal Checks (allow 10 days clearance for checks). See your shopping cart during checkout for additional details.

Patches of Pride products are manufactured in 1/6th scale for use with 12 inch action figure toys like GIjOEs--not for use on full-size real uniforms worn by human beings. These products are accurate (miniature) recreations of historical artifacts, some related to the Axis powers of WWII. Patches of Pride / Toylectibles / Sterling Creative Group however, and the individuals connected with the manufacture of these products do not endorse nor subscribe to the philosophies or beliefs of Nazism. Quite the contrary. Our miniature products are intended for the use of FREEDOM-LOVING toy and action figure collectors, military hobbyists, militaria enthusiasts and historians around the world in the completion of their dioramas, or other such miniature 1/6th scale historical displays---and not for any other purpose. We do NOT sell nazi-related merchandise to customers with addresses in Germany. The use of photos in this website showing vintage GIJoes or Barbies or other such toys, or the GIjOE, Hasbro, Mattel (or other) logos is not meant to indicate an endorsement by any of those companies.

©Mark Otnes, DBA Patches of Pride / Toylectibles / Sterling Creative Group
All rights reserved. 303 E. Sherwin Drive, Urbana, IL 61802
Phone:
217-337-1706, Email: mark@patchesofpride.com







download
download.com