Sea Sled Decals & Accessories ­ Page 1


DESCRIPTION (Please read):
The items for sale on this page are high quality MINIATURE decals and replacement parts for use with the vintage 1960s GIjOE Sea Sled and are compatible only with 12" action figures such as GIjOE, Action Man, Dragon, BBi, etc. They are not intended for use with full-size (i.e. real person) Sea Sleds (Sorry, SPECTRE!) HA!

Action figures and sea sled toys shown in the photos (at right and below) are for demonstration purposes only and are not included. All PoP products are produced here in the USA. Complete installation instructions are included with every order. Please send us an E-Mail if you have any questions about whether or not a product is compatible with your specific toy. Hot babes with spear guns are not included (sorry).

 
Sea Sled "GIJOE" Hull Decal
(ProSeries waterslide, white)

The original release of the Sea Sled featured spray-painted "GIJOE" (white) letterling on the port side (only) of the bow section. Our (white) waterslide ProSeries decal exactly replaces this faded or missing graphic. Simply soak the decal in water and slide it off its backing paper into position on the toy. Once it is dry, seal it with 2-3 light overcoats of glossy clear. No adhesives are required.
Complete installation instructions are included.

SEE CLOSEUP

Sea Sled "GIJOE" Hull Decal (1)
(white, waterslide)-
Item #SEASLED1, $7.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Hull ID Numbers
Numbers for each sled in your fleet!
(white, waterslide)

Do you own more than one Sea Sled?
Now you can dress them up with unique hull identification number decals! Simply soak the decal in water and slide it off its backing paper into position on the toy. Once it is dry, seal it with 2-3 light overcoats of glossy clear. No adhesives are required. Each decal come with complete, step-by-step installation instructions. Available individually or as a 10-number set (see below).

Sea Sled Hull Number Decal
Includes: Any (1) number of your choice. (white, waterslide)
Please specify a number when ordering.
SEE CLOSEUP
Item #SEASLED2, $4.95

Sea Sled Hull Numbers 10-Decal Value Set
Includes all numbers from 0 to 9. (white, waterslide)
SEE CLOSEUP
Item #SEASLED3, $19.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Sonar Display
w/Gauges Decal Set
(full color, peel-n-stick)

Each of these (brand new) decal sets are printed onto top-quality, glossy peel-n-stick stock. Simply trim out, peel off the backing paper and stick down. No adhesives are required. For the ultimate effect, cover them with some of our new sonar and gauges domes (shown below and sold separately). (green/black/red)
Complete installation instructions included.

SEE CLOSEUP

Glossy, peel-n-stick-
Item #SEASLED4, $9.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Sonar Dome
w/Real Magnifying Action!

Absolutely beautiful replacement sonar dome for use on your vintage Sea Sled. Replaces missing, cracked or scuffed originals. All domes are precision machined to the exact size and hemispheric shape of the ones used on vintage Sea Sleds and are constructed of solid, clear acrylic to create a REAL magnifying effect when placed over our new sonar display decal (sold separately, see above). Installs with a 2 drops of superglue--in only seconds!

SEE CLOSEUP

Sea Sled Sonar Dome
Solid acrylic-
Item #SEASLED5, $11.95
(The cost of shipping is included in the price.)

 
Sea Sled Gauge Dome Bezel Set (2)
w/Real Magnifying Action!

Absolutely beautiful gauge dome bezels for use on your vintage Sea Sled. Each is precision-made to the exact size and hemispheric shape required to fit vintage and AT Sea Sleds and are constructed of flexible, clear acrylic, creating a REAL magnifying effect when placed over our new gauge decals (sold separately). Installs with a 2 drops of gel-based superglue--in only seconds!

SEE CLOSEUP

Sea Sled Gauge Dome Set (2)
Solid acrylic-
Item #SEASLED6, $4.95
(Shipping is FREE to addresses within the U.S.)

  

Sea Sled Ultra-Flex
Replacement Windshield
(clear, unbreakable, flexible acylic)

It's not widely known, but the vintage Sea Sled and the AT Sea Sled windshields were of different sizes and shapes. The AT version is about half the height and is known as the "Low Rise" windshield, while the vintage one was taller and is known as the "Sea Sled windshield." HA! Each of our reproductions is custom-made to the original's exact size and shape and is constructed of flexible, clear acrylic.It's also slightly thinner than the original, more durable and UNBREAKABLE. Installs with a 3 drops of gel-based superglue placed on the mounting pegs, then inserted into the holes on the sled.

SEE CLOSEUP

Sea Sled "Ultra-Flex" Unbreakable
Replacement Windshield

Clear, flexible acrylic-
Item #SEASLED7, $18.95
(Shipped (flat) FREE to addresses within the U.S.)

  
Sea Sled Pontoon Gasket
(flexible black rubber)

These are durable, pliable, EXACT replacement pontoon gaskets for use on your vintage GIjOE Sea Sled. Manufactured to specific standards, they're perfect duplicates of the originals which were (and are) required for proper sled diving operation. Simply insert them into place for an easy installation. No adhesive is required. For use with the orange Sea Sled only. Each gasket is sold separately.

Sea Sled Replacement Pontoon Gasket (1)
Item #SEASLED8, $2.95
(Shipping is FREE to addresses within the U.S.)

  
Sea Sled Replacement Rudder
(ready-to-paint plastic w/rubber grommet and spline)

SEE CLOSEUP

These are durable, pliable replacement rudders for use on your vintage GIjOE Sea Sled. Crafted to specific standards, they're near-exact duplicates of the originals which were (and are) required for proper sled diving operation. For use with the orange Sea Sleds only. We've left these unpainted, as we found it much preferable to wait and paint them (semi-flat black) AFTER they've been installed, allowing a little extra paint to also overlap onto the diving plane, ensuring a seamless color match. Complete installation instructions are included.

Sea Sled Replacement Rudder
Item #SEASLED9, $14.95
(Shipping is FREE to addresses within the U.S.)

  
Sea Sled Replacement Diving Plane
(ready-to-paint plastic)

These are styrene plastic replacement diving planes for use on your vintage GIjOE Sea Sled. Crafted to specific standards, they're near-exact duplicates of the originals which were (and are) required for proper sled diving operation. Simply insert them into place for an easy installation. No adhesive required. For use with the orange Sea Sled only. We have left these unpainted, as we've found it much preferable to wait and paint them (semi-flat black) AFTER they've been installed, allowing a little extra paint to also overlap onto the rudder, ensuring a seamless color match. Complete installation instructions included.

Sea Sled Replacement Diving Plane (1)
Item #SEASLED10, $14.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Deck Repair Panel
(ready-to-paint plastic)

SEE CLOSEUP

These are durable, deck repair panels for use on your vintage GIjOE Sea Sled. If your sled's deck is damaged, this panel with let you attach our replacement rudder. For use with the orange Sea Sled only. We have left these unpainted, as we've found it much preferable to wait and paint them (semi-flat black) AFTER they've been installed, allowing a little extra paint to also overlap onto the diving plane, ensuring a seamless color match. Complete installation instructions included.

Sea Sled Deck Repair Panel (1)
Item #SEASLED11, $4.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Diver's Arch Restraint
(ready-to-paint plastic)

SEE CLOSEUP

This is a durable, pliable replacement diver's arch for use on your vintage GIjOE Sea Sled. Manufactured to specific standards, they're near duplicates of the originals which were (and are) required to keep a figure securely on the sled. Simply glue them into place for an easy installation. For use with BOTH the orange Sea Sled and the blue AT Sea Sled. We have left these unpainted, as we've found it much preferable to wait and paint them (semi-flat black or blue) AFTER they've been installed, allowing extra paint to also overlap onto the deck, ensuring a seamless color match. We recommend LOCTITE superglue for plastic connections such as these (it's FANTASTIC stuff)! Shipped flat. You will warm it up in water, curve it around a can, allow it to cool somewhat and then glue it onto your sea sled's deck. Complete, step-by-step installation instructions included.

Sea Sled Diver's Arch Restraint
Item #SEASLED12, $18.95
(Shipping is FREE to addresses within the U.S.)

 
Sea Sled Replacement Speargun Barrel
(pre-painted plastic)

SEE CLOSEUP

These are BEAUTIFUL, pliable replacement speargun barrels for use on your vintage GIjOE Sea Sled. Crafted to specific standards, they're near-exact duplicates of the originals, pre-painted semi-flat black, and ready to install. PLEASE NOTE: These are the barrels ONLY (as shown in the picture above). The gun holder section is NOT included. Simply drill a hole into the holder section and insert these into place with a drop of gel-based superglue for an easy installation. For use with the orange Sea Sled only. Complete installation instructions included.

Sea Sled Replacement Speargun Barrel
Item #SEASLED13, $14.95
(Shipping is FREE to addresses within the U.S.)

  
Looking for decals or parts for your vintage AT Sea Sled?
GO TO THAT PAGE NOW

DECALS-----HOME


TO ORDER an item shown on this page:

Name of Product:


Quantity:




Looking for something specific, but don't know where to start?


PLEASE NOTE: All credit card information and transactions are 100% secure. We currently accept the following forms of payment: PayPal, Mastercard, VISA, Discover, Money Orders, Personal Checks (allow 10 days clearance for checks). See your shopping cart during checkout for additional details.

Patches of Pride products are manufactured in 1/6th scale for use with 12 inch action figure toys like GIjOEs--not for use on full-size real uniforms worn by human beings. These products are accurate (miniature) recreations of historical artifacts, some related to the Axis powers of WWII. Patches of Pride / Toylectibles / Sterling Creative Group however, and the individuals connected with the manufacture of these products do not endorse nor subscribe to the philosophies or beliefs of Nazism. Quite the contrary. Our miniature products are intended for the use of FREEDOM-LOVING toy and action figure collectors, military hobbyists, militaria enthusiasts and historians around the world in the completion of their dioramas, or other such miniature 1/6th scale historical displays---and not for any other purpose. We do NOT sell nazi-related merchandise to customers with addresses in Germany. The use of photos in this website showing vintage GIJoes or Barbies or other such toys, or the GIjOE, Hasbro, Mattel (or other) logos is not meant to indicate an endorsement by any of those companies.

©Mark Otnes, DBA Patches of Pride / Toylectibles / Sterling Creative Group
All rights reserved. 303 E. Sherwin Drive, Urbana, IL 61802
Phone:
217-337-1706, Email: mark@patchesofpride.com





download
download.com